KEC-30G Electronic compass + Heading Sensor

SUMMER SALE - This item has 1 year full warranty

The 9 axis Heading Sensor looks like a conventional GPS but the similarity ends there. Inside its IP67 case there is a very sophisticate device that can calculate SOG, COG, position and heading, pitch, roll and yaw and it does all of these rather well. From switch on, it gets a heading in just a few seconds. Coupled to the electronic compass an accurate course heading is shown at all times.

Low cost solution, High Accuracy Digital Compass

KEC30G(MK2) also provides GPS information, Long/Lat, SOG and COG

Used with High Accuracy Onwa Marine Heading Sensor KA-GC9A, KA-GC05 or Hemisphere GPS Compass(V102 or V104s) GC9A is supplied as standard

Can Correct Magnetic Deviation Manually or Automatically

Selectable output baud rate and intervals for heading information (HDT, HDM or HDG)

Output of GPS and heading signal can be interfaced with other equipment on board.

Waterproof and robust heading sensor suitable for outdoor marine condition.

 
OUTPUT/INPUT(IEC61162-1)

INPUT 2 x NMEA0183
a) Input sentences : GGA, GLL, GMS, GNS, GSA, GSV, RMC, VTG, HDT
b) Baud rate : auto scan up to 38400
c) Support heading/GPS sensor : KA-GC05, KA-GC9A and Hemisphere GPS Compass (V102 and V104s)
OUTPUT 2 x NMEA0183
Port 1 and Port 2(RS232) : Also available as an RS422 version
a) Output sentences : HDT, HDM and HDG (selectable) and RMC, GSA, GGA, VTG, ZDA (Fixed)
b) Heading Output interval selections : 25ms, 100ms, 200ms (default) and 1,000ms
c) Output baud rate selections : 4800 (default), 9600, 19200 and 38400 (selectable)

Heading Sensor

• Low-cost solution for Heading Data
• Enhanced Performance
• User-Programmable
• Customizable GPS Output Sentences and Baud rate
• Better Stability of Heading output
• Real-time response Rate
• NMEA0183 Interface
• High-grade waterproof housing
• Longevity of usage in Marine Environment
• 9-Axis(Features a GPS receiver coupled with a 9-axis AHRS unit providing 3D orientation by integrating gyroscopes and data fusing with accelerometers and magnetometers)

Heading sensor supplied with a surface mount base, other versions available at additional cost

Adjustable surface or rail mount for Heading Sensor. (specify which version you need with your order). Highly polished stainless versions also available .